If Dehumidification Is Done; Fresh Air Ventilation - Aprilaire S86W MUPR Owner's Manual

IF DEHUMIDIFICATION IS DONE WITH THE AIR CONDITIONER
The thermostat will cool up to 3°F beyond the cooling setpoint for dehumidification.
NOTE: overcooling may not be sufficient to meet the dehumidification setpoint.
ENERGY SAVING TIP #1:
Adjust the setting to be as high as is comfortable to reduce dehumidification run time – if it
feels clammy or smells damp or moldy lower the setting. To save energy, turn the dehumidifier
control OFF when you open your windows just as you would with air conditioning
ENERGY SAVING TIP #2:
If vacating your home for an extended period in the summer, set the relative humidity to 60%
and the cooling set point to the highest level that meets the comfort and safety needs of your
pets and possessions Consult with professionals to determine the best set point This will keep
the humidity at a controlled level to help prevent mold while minimizing the amount of the
cooling energy used Vacation hold is a convenient way to adjust the dehumidification and
cooling setpoint when you will be away See page 27
18
FRESH AIR VENTILATION (IF INSTALLED)
This thermostat can be configured, through the
Installer set-up, to control fresh air ventilation
based on a predetermined hourly schedule
You can temporarily override that schedule to
bring in more fresh air, if desired, or even turn it
off if outdoor conditions are poor
1. Select Ventilation from the Main Menu
2. From this screen you can select Ventilation
Events or Mode
Main Menu
1
Dehumidifier
Ventilation
Air Cleaning
Vacation
Settings
Ventilation
3 Hrs
24 Hrs
2
Mode
19