Table of Contents
Advertisement
Chapter 1
Connecting the
Computer and Printer
The printer can be connected to your
computer via USB cable, Bluetooth
(RJ-4030/RJ-4030Ai), Wi-Fi (RJ-4040 only)
and the serial cable.
Install the printer driver before
connecting the printer to the computer.
Note
When connecting via Bluetooth, the
connection settings are saved even after
the printer is turned off.
USB Connection
a
Make sure that the printer is turned off
before connecting the USB cable.
b
Connect the printer end of the USB
cable to the USB port on the side of the
printer.
c
Connect the other end of the USB cable
to the USB port on the computer.
20
Bluetooth Connection
(RJ-4030/RJ-4030Ai)
1
Note
Follow the recommendations of the
manufacturer of your Bluetooth-equipped
computer or Bluetooth adapter and install
any necessary hardware and software.
Use this procedure to pair the printer with the
computer using the Bluetooth management
software.
a
Press and hold the
turn the printer on and then press and
hold the Bluetooth button.
b
Use your Bluetooth management
1
software to discover the printer and
configure the printer connection.
Note
If the software prompts you to enter a
Bluetooth passkey (PIN code), enter the
passkey assigned to the printer. The
printer's passkey is the last four digits of its
serial number by default.
c
When a computer is used, select "serial
port" as the connection method to the
printer in the Bluetooth connection
screen.
Note
• Note the COM port number when it
appears. (Depending on the type of the
computer or mobile device, the COM port
number may be required for printing.)
• Refer to your Bluetooth management
software's documentation for details on
connection settings, confirming the port
name, etc.
1
(Power) button to
Advertisement
Table of Contents
