Preparation; Removing The Insulating Tape; Switching Between °C And °F - Omron MC-720 Instruction Manual

2. Preparation

2.1

Removing the Insulating Tape

When using the unit for the first time, pull the insulating tape
out of the battery compartment.
The unit is turned on and after 1 minute the room temperature
appears on the display.
Notes:
• The room temperature remains on the display even after the unit turns off.
• Place the unit on a level surface, in a place that is at room temperature (away from direct sunlight or air conditioning, etc.).
2.2
Switching between °C and °F
This unit is set in °C as default.
1.
While the room temperature is displayed, press and hold the START button.
2.
While holding it down, press and hold the ON/MEM
button until °F appears on the display with two beeps.
Notes:
• To select °C mode again, start from step1.
• When the unit is switched between °C and °F, all the readings stored in the
memory are deleted.
4
Back of the unit