The Components Of The Product; Preparation Before Measurement; A Clean Probe Cover; Move The Unit In The Ear - Omron GentleTemp 510 Instruction Manual

GentleTemp 510
English
2

PREPARATION BEFORE MEASUREMENT

2.1 A clean probe cover

Confirm that a clean probe cover is attached to the main unit.
Replace the probe cover in the following cases:
• When it is dirty, broken, or damaged.
• After somebody else has used it.
1 Remove the probe cover.

2.2 Move the unit in the ear

To obtain a correct measurement it is important to move the unit
inside the ear.
2 Attach a new probe cover.
Insert the probe cover
until it clicks.
External auditory
canal
Infrared rays Eardrum

2.3 Measuring the temperature of an infant

Measuring on a lying Measuring on a sitting
baby. baby.
Lightly support the Lightly support the
child's body. child's body and
slightly pull the ear
towards the back.
Slightly move the
unit inside the ear
When the ear is too
small to insert the
probe:
While slightly pulling
the ear towards the
back, cover the external
auditory canal with the
probe without forcibly
trying to insert the
probe. 5