Where To Go Next; Ni Services - National Instruments NI-9147 Getting Started

LED Pattern Indication
by enabling safe mode in MAX. Refer to the Measurement & Automation
Explorer (MAX) Help for information about safe mode.
Blinks four times The NI-9147 is in safe mode. The software has crashed twice without
and pauses rebooting or cycling power between crashes.
Continuously blinks The NI-9147 has detected an unrecoverable error. Contact NI for support.
On momentarily The NI-9147 is booting. No action required.
Off The NI-9147 is in run mode. Software is installed and the operating system is
running.
Table 3. STATUS LED Indicators

Where to Go Next

HARDWARE

NI Services

Visit ni.com/support
downloads, and troubleshooting and application development self-help such as
tutorials and examples.
SOFTWARE
NI 9147
Configuring a Project
Specifications
NI-RIO Help
ni.com/manuals
NI 9147
Learn LabVIEW Basics
User Manual
ni.com/gettingstarted
ni.com/manuals
C Series Getting
CompactRIO Examples
Started Guides
NI Example Finder
ni.com/manuals
SUPPORT
Software Support Support
ni.com/info swsupport ni.com/support
to find support resources including documentation,
NI-9147 Getting Started
APPLICATION
NI CompactRIO
Developer's Guide
ni.com/compactriodevguide
CompactRIO Sample
Projects
LabVIEW Create Project
Services NI Community
ni.com/services ni.com/community
17
© National Instruments