Table of Contents
Advertisement
LED Pattern
Indication
by enabling safe mode in MAX. Refer to the Measurement & Automation
Explorer (MAX) Help for information about safe mode.
Blinks four times
The NI 9149 is in safe mode. The software has crashed twice without
and pauses
rebooting or cycling power between crashes.
Continuously blinks The NI 9149 has detected an unrecoverable error. Contact NI for support.
On momentarily
The NI 9149 is booting. No action required.
Off
The NI 9149 is in run mode. Software is installed and the operating system is
running.
Table 3. STATUS LED Indicators
Where to Go Next
HARDWARE
NI Services
Visit
ni.com/support
downloads, and troubleshooting and application development self-help such as
tutorials and examples.
SOFTWARE
NI 9149
Configuring a Project
Specifications
NI-RIO Help
ni.com/manuals
NI 9149
Learn LabVIEW Basics
User Manual
ni.com/gettingstarted
ni.com/manuals
C Series Getting
CompactRIO Examples
Started Guides
NI Example Finder
ni.com/manuals
SUPPORT
Software Support
Support
ni.com/info swsupport
ni.com/support
to find support resources including documentation,
NI-9149 Getting Started
APPLICATION
NI CompactRIO
Developer's Guide
ni.com/compactriodevguide
CompactRIO Sample
Projects
LabVIEW Create Project
Services
NI Community
ni.com/services
ni.com/community
17
© National Instruments
Advertisement
Table of Contents
