Horizontal Operating Position - Fujitsu FUTRO S9010 Operating Manual

Getting started
► Stand the device on the feet.
► If necessary, reconnect any cables that were previously disconnected.

Horizontal operating position

If you wish to operate the device in the horizontal operating position, use
the two feet supplied for horizontal operation.
Only mount the feet on the device side shown in the diagrams.
Proceed as follows to prepare the device for the horizontal operating position:
Base feet Operatingposition,horizontal Horizontaloperatingposition
► Disconnect the cables if required.
► Lay the device on its right side as shown, on a stable, flat and clean surface.
16 Fujitsu