IBM 9223-22H Manual page 39

Procedure
1. Type strsst on the command line of the Main Menu and then press Enter.
2. Type your service tools user ID and service tools password on the Start Service Tools (STRSST) Sign
On display and then press Enter.
3. Select Start a service tool from the System Service Tools (SST) display and then press Enter.
4. Select Hardware service manager from the Start a Service Tool display and then press Enter.
5. Select Packaging hardware resources (system, frames, cards) from the Hardware Service
Manager display and then press Enter.
6. Type 9 on the System Unit line and then press Enter.
7. Select Include empty positions.
8. Look for the PCI adapter location codes in the Location column.
9. Write down the Type-Model number for each PCI adapter location.
Some adapters can show multiple, virtual ports. It is not necessary to write down these virtual
locations.
10. Write down any PCI adapter locations that are listed in the Description column as an Empty
Position.
The Type-Model number is blank for empty positions.
11. Press F12 to return to the previous window.
12. Do you have an expansion unit attached?
• No: Go to "Adapter placement rules and slot priorities for the 5105-22E, 9008-22L, 9009-22A,
9009-22G, 9223-22H, or 9223-22S" on page 6
• Yes: Do the following tasks:
a. Type 9 for the System Expansion Unit field and press Enter.
b. Repeat steps 7-11 for each expansion unit.
c. Select an available slot in the expansion unit.
Adapter placement for the 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, or 9223-22S 25