IBM 9223-22H Manual page 26

priority for these slots is for CAPI accelerator adapters, PCI accelerator adapters, high-performance
adapters, followed by any other adapters.
6. PCIe internal slots are used to install high-performance internal SAS RAID adapters.
7. There is no Fibre Channel over Ethernet (FCoE) support for FC EN0J, FC EL38, FC EN0L, FC EL3C, and
FC EN0N.
8. Configuring an SR-IOV adapter into SR-IOV shared mode may require extra hypervisor memory. If
sufficient hypervisor memory is not available, the request to move to SR-IOV shared mode will fail. The
user will be instructed to free up extra memory and try the operation again.
Verify whether the adapter is supported for your system. The feature code (FC) column in the following
table lists all of the supported adapters for systems. You can select the FC for more details. To view
a list of adapters supported in the POWER9 processor-based systems and the EMX0 PCIe3 expansion
drawer, see Adapter information by feature code for the 9008-22L, 9009-22A, 9009-22G, 9009-41A,
9009-41G, 9009-42A, 9009-42G, 9040-MR9, 9080-M9S, 9223-22H, 9223-22S, 9223-42H, 9223-42S
system and EMX0 PCIe3 expansion drawers (http://www.ibm.com/support/knowledgecenter/POWER9/
p9hcd/p9hcd_pcibyfeature.htm).
Note: In the following table, the slot priority numbers 2 - 4 correspond to slot locations P1-C2 through
P1-C4. And slot priority numbers 6 - 12 correspond to slot locations P1-C6 through P1-C12.
Table 9. Adapter slot priorities and maximum adapters supported in the 9008-22L, 9009-22A, or 9223-22H system
Feature Description
code
5260 PCIe2 4-port 1 GbE
adapter (FC 5260,
5899, EL4L, and
EL4M; CCIN 576F);
Adapter part number:
74Y4064
5269 POWER GXT145 PCI
Express Graphics
Accelerator (FC
5269; CCIN 5269);
Adapter part number:
74Y3227
5273 PCIe2 8 Gb dual-
port Fibre Channel
adapter (FC 5273,
5735, EL2N, and
EL58); CCIN 577D);
Adapter part number:
10N9824
5277 4-port Async EIA-232
PCIe 1X adapter (FC
5277 and 5785; CCIN
57D2); Adapter FRU
number 46K6734
EC2R PCIe3 2-port 10 Gb
NIC & RoCE SR/Cu
adapter (FC EC2R and
EC2S; CCIN 58FA);
Adapter part number:
01FT759
EC2T PCIe3 2-port 25/10
Gb NIC & RoCE SFP28
adapter (FC EC2T and
EC2U; CCIN 58FB);
Adapter part number:
01FT753
12 Power Systems: Adapter placement for the 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, or
9223-22S
9009-22A or 9223-22H 9009-22A or 9223-22H
(one processor)
Slot Maximum Slot
priorities number of priorities
adapters
supported
11, 12, 6, 7, 6 11, 12, 6, 7,
8, 9 8, 2, 9, 4, 3
8, 9 2 8, 2, 9, 4, 3
8, 9, 6, 12, 7 8 8, 2, 4, 9, 3,
6, 12, 7
8, 9 2 8, 2, 9, 4, 3
7, 12, 6, 8, 9 5 7, 12, 6, 2, 8,
4, 3, 9
8, 9, 7, 12, 6 5 2, 8, 4, 3, 9,
7, 12, 6
9008-22L
(two processors) (one processor)
Maximum Slot
number of priorities
adapters
supported
9 11, 12, 6, 7,
8, 9
5 8, 9
8 8, 9, 6, 12, 7
5 8, 9
8 7, 12, 6, 8, 9
8 8, 9, 7, 12, 6
9008-22L
(two processors)
Maximum Slot Maximum
number of priorities number of
adapters adapters
supported supported
6 (FC EL4M) 11, 12, 6, 7, 9 (FC EL4M)
8, 2, 9, 4, 3
2 8, 2, 9, 4, 3 5
5 (FC EL2N) 8, 2, 4, 9, 3, 8 (FC EL2N)
6, 12, 7
2 8, 2, 9, 4, 3 5
5 7, 12, 6, 2, 8, 8
4, 3, 9
5 2, 8, 4, 3, 9, 8
7, 12, 6