IBM 9223-22H Manual page 25

Table 8. Adapter slot priorities and maximum adapters supported in the 5105-22E, 9009-22G, or 9223-22S system (continued)
Feature code
EN0Y 2
EN1B 2
EN1D 2
EN1F 2
EN1H 2
EN1K 2
EN2B 2
1 The adapters are installed in this order in the system for best performance.
2 The adapter is not supported on the 5105-22E system.
Adapter placement rules for 9008-22L, 9009-22A, or 9223-22H
Use this information while selecting slots for installing adapters in the 9008-22L, 9009-22A, or 9223-22H
system.
1. The slot P1-C11 must be used to install the local area network (LAN) adapter feature codes (FCs). Any
other adapter feature is not supported in this slot.
2. The PCIe3 cable adapter (FC EJ05 or FC EJ1R) for the EMX0 PCIe3 expansion drawer is supported in
slots P1-C4 and P1-C9.
Note: The EJ05 adapter is a double-wide adapter that requires two adjacent slots.
3. CAPI accelerator adapters are supported in slots P1-C2, P1-C3, P1-C7, and P1-C9.
4. Slots P1-C2 and P1-C8 are slots with PCIe x8 buses that are directly connected from the system
processor modules. The slots can be used to install high-performance adapters. The adapter priority
for this slot is for the high-performance adapters followed by any other adapters.
5. Slots P1-C3, P1-C4, and P1-C9 are slots with PCIe x16 buses that are directly connected from the
system processor modules. These slots can be used to install high-performance adapters. The adapter
Adapter placement for the 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, or 9223-22S 11
Description 5105-22E, 9009-22G, or 9223-22S
Slot priorities
PCIe2 LP 8 Gb 4-port 8, 9, 10, 7, 5, 12, 6
Fibre Channel adapter
(FC EN0Y; CCIN EN0Y);
Adapter part number:
74Y3923
PCIe3 x8 2-port Fibre 8, 9, 10, 7, 5, 12, 6
Channel (32 Gb/s); (FC
EL5U, EL5V, EN1A, and
EN1B); CCIN 578F);
Adapter part number:
01FT703
PCIe3 x8 4-port Fibre 8, 9, 10, 7, 5, 12, 6
Channel (16 Gb/s); (FC
EL5W, EL5X, EN1C, and
EN1D; CCIN 578E);
Adapter part number:
01FT698
PCIe3 x8 4-port Fibre 8, 9, 10, 7, 5, 12, 6
Channel (16 Gb/s); (FC
EN1E and EN1F; CCIN
579A); Adapter part
number: 02JD586
PCIe3 x8 2-port Fibre 8, 9, 10, 7, 5, 12, 6
Channel (16 Gb/s) (EN1G
and EN1H; CCIN 579B);
Adapter part number:
02CM900 and 02CM903
PCIe4 x8 2-port Fibre 8, 9, 10, 7, 5, 12, 6
Channel (32 Gb/s); (FC
EN1J and EN1K; CCIN
579C); Adapter part
number: 02CM909
PCIe3 16 Gb 2-port 8, 9, 10, 7, 5, 12, 6
Fibre Channel adapter
(FC EN2A and FC EN2B;
CCIN 579D); Adapter part
number: 02JD564
(one processor)
Maximum number of Slot priorities
adapters supported
7 8, 2, 4, 9, 3, 6, 12, 7,
10, 5
7 8, 2, 4, 9, 3, 6, 12, 7,
10, 5
7 8, 2, 4, 9, 3, 6, 12, 7,
10, 5
7 8, 2, 4, 9, 3, 6, 12, 7,
10, 5
7 8, 2, 4, 9, 3, 6, 12, 7,
10, 5
7 8, 2, 4, 9, 3, 6, 12, 7,
10, 5
7 8, 2, 4, 9, 3, 6, 12, 7,
10, 5
5105-22E, 9009-22G, or 9223-22S
(two processors)
Maximum number
of adapters
supported
10
10
10
10
10
10
10