Table of Contents
Advertisement
SELF-TIMER
pg. 40, "Self-Timer"
5S
[OFF]: Disables 5-second recording.
5S: Enables 5-second recording. (
Anim.: Allows you to record a few frames only.
By using an inanimate object and changing its
position between shots, you can record the
subject as though it is moving.
TELE MACRO
[OFF]: Disables the function.
ON: When the distance to the subject is less
than 1 m, set "TELE MACRO" to "ON". You can
shoot a subject as large as possible at a
distance of approx. 70 cm.
NOTE:
Depending on the zoom position, the lens may go out
of focus.
WIDE MODE
[OFF]: Records with no change in the screen
ratio. For playback on a TV with a normal screen
ratio.
CINEMA*
: Inserts black bands at the top and
bottom of the screen. The
During playback on wide-screen TVs, the black
bands at the top and bottom of the screen are
cut and the screen ratio becomes 16:9. When
using this mode, refer to your wide-screen TV's
instruction manual.
16:9 WIDE*
: For playback on TVs with an
aspect ratio of 16:9. Naturally expands the
image to fit the screen without distortion. The
indicator appears. When using this mode,
refer to your wide-screen TV's instruction
manual.
* Available only when the VIDEO/MEMORY switch
is set to "VIDEO".
NOTE:
During playback/recording on 4:3 TVs/LCD monitor,
black bands are inserted at the top and bottom of
the screen and the image appears like a letter
boxed 16:9 movie. (CINEMA and 16:9 WIDE mode)
WIND CUT
[OFF]: Disengages the function.
ON
: Helps cut down on noise created by
wind. The "
" indicator appears. The quality of
the sound will change. This is normal.
FLASH ADJ.
pg. 39, "Flash Brightness Adjustment"
[OFF] / ON
pg. 40)
indicator appears.
MENUS FOR DETAILED ADJUSTMENT
The "s SYSTEM" functions which are set when
the power switch is set to "M" are also applied
when the power switch is set to "PLAY".
[ ] = Factory-preset
BEEP
OFF: Even though not heard while shooting,
shutter sound is recorded on the tape.
BEEP: The beep sounds when the power is
turned on or off, and at the beginning and end of
recording. It also activates the shutter sound
effect. (
pg. 25, 39)
[MELODY]: Instead of a beep, a melody sounds
when any operation is performed. It also
activates the shutter sound effect.
(
pg. 25, 39)
TALLY
OFF: The tally lamp remains off at all times.
[ON]: The tally lamp comes on to signal the start
of recording.
REMOTE
OFF: Disables the remote control operations.
[ON]: Enables the remote control operations.
EN
SYSTEM
35
Advertisement
Table of Contents
