Removing the plastic cover for
bulb replacement
The bulb in the halogen headlamp can be
replaced without the help of a workshop, but
the plastic cover over the headlamp must be
removed before a bulb can be replaced.
Lift off the rubber strip by pressing it
inward in the engine compartment.
Press down the pins into the plastic cov-
er's four clips using a screwdriver or simi-
lar and lift away the cover.
Refit the cover in reverse order.
Related information
Bulb replacement (p. 666)
•
Replacing the dipped beam bulb (p. 669)
•
Replacing the main beam lamp (p. 669)
•
Replacing daytime running light bulb/posi-
•
tion lamp bulb, front (p. 670)
Replacing the front direction indicator
•
bulb (p. 671)
Bulb specifications (p. 672)
•
MAINTENANCE AND SERVICE
Removing the headlamp's oval
cover
Most of the headlamp's bulbs become acces-
sible when the oval cover has been removed.
Before the oval cover can be removed, the
plastic cover over the headlamp must first be
lifted off.
Left-hand headlamp.
1.
Unscrew the cover's four screws using a
tool for Torx, dimension T20 (1). Do not
unscrew fully, 3-4 turns is sufficient.
Slide the cover to one side.
3. Remove the cover.
Reinstall the cover in reverse order.
Related information
Bulb replacement (p. 666)
•
Replacing the dipped beam bulb (p. 669)
•
}}
667