Using jump starting with another battery
•
(p. 501)
Selecting ignition mode (p. 449)
•
Gearbox (p. 459)
•
Fitting and removing the towing
eye
Use the towing eye for towing. The towing
eye is screwed into a threaded socket behind
a cover on the right-hand side of the bumper,
front or rear.
NOTE
If the car is equipped with a towbar, there
is no rear mounting for a towing eye.
Fitting the towing eye
Take out the towing eye from the foam
block under the floor in the cargo area.
STARTING AND DRIVING
Front: Remove the cover – use the car's
key or a small screwdriver in the socket to
carefully prize off the cover.
> The cover pivots around its centre line
and can then be removed.
Rear: Remove the cover – press on the
marking with a finger while you fold out
the opposite side/corner.
> The cover pivots around its centre line
and can then be removed.
}}
513