Replacing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Place the fan on the heat sink.
2
Align the screw holes on the fan with the screw holes on the heat sink.
3
Replace the screws that secure the fan to the heat sink on the system
board.
4
Connect the fan cable to the system board.
5
Slide the drive cage into the chassis.
6
Align the screw holes on the drive cage with screw holes on the chassis.
7
Replace the screws that secure the drive cage to the chassis.
Post-requisites
1
Replace the
front
2
Replace the
computer
computer. After working inside your
bezel.
cover.
After working inside your
25