Volvo S90 2019 Owner's Manual page 428

STARTING AND DRIVING
||
®
HomeLink is delivered integrated in the rear-
view mirror. The HomeLink
three programmable buttons and an indicator
light in the mirror.
For more information about HomeLink
please visit: www.HomeLink.com or call
1-800-355-3515.
Save the original remote controls for future
programming (e.g. for use in another vehicle).
It is also advisable to delete the button pro-
gramming if the vehicle is sold.
Related information
®
Using HomeLink * (p. 428)
•
Programming HomeLink
•
• Type approval for HomeLink
19 Certain markets only.
426
Programming HomeLink
®
panel consists of
Follow these instructions to program
HomeLink
gram individual buttons.
®
,
NOTE
In some vehicles, the ignition must be on
or in the "accessory position" before
HomeLink
can be a good idea to put new batteries in
the remote control being replaced by
HomeLink
better radio signal transmission. The
HomeLink
programming.
®
* (p. 426)
®
* (p. 429)
WARNING
While HomeLink
the garage door or gate being programmed
may be activated. Make sure that no one is
near the door or gate during programming.
When programming a garage door opener,
it is advised to park outside of the garage.
®
19
*
®
, reset all programming, or pro-
®
can be programmed or used. It
®
for faster programming and
®
buttons should be reset before
®
is being programmed,
1. Point the remote control at the
®
HomeLink button to be programmed and
hold it about 2-8 cm (1-3 inches) from the
button. Do not obstruct the HomeLink
indicator light.
Note: Some remote controls are more
effective at programming HomeLink
a distance of about 15-20 cm (6-12
inches). Keep this in mind if you experi-
ence any programming difficulties.
2. Press and hold both the remote control
®
button and the HomeLink
programmed.
* Option/accessory.
®
®
from
button to be