Volvo S90 2019 Owner's Manual page 187

Storing positions
1. Adjust the seat, door mirrors and head-up
display to the desired position.
2. Press and hold the M button. The indica-
tor light in the button will illuminate.
3. Within three seconds, press and hold the 1
or 2 button.
> When the position has been stored in
the memory button, an audio signal will
sound and the indicator light in the M
button will go out.
If none of the memory buttons are pressed
within three seconds, the M button will go out
and no position will be stored.
The seats, door mirrors or head-up display
must be readjusted before a new memory
position can be set.
Related information
Manual front seats (p. 182)
•
Power* front seats (p. 183)
•
Adjusting the power* front seats (p. 183)
•
Using stored positions for seats, mirrors
•
and head-up display* (p. 185)
Adjusting front seat massage settings*
•
(p. 187)
Adjusting* front seat cushion length
•
(p. 188)
Front seat massage* settings (p. 186)
•
Adjusting front seat side bolster settings*
•
(p. 189)
Adjusting front seat lumbar support*
•
(p. 189)
Adjusting the passenger seat from the
•
driver's seat* (p. 191)
Adjusting the door mirrors (p. 169)
•
Head-up display settings* (p. 141)
•
SEATS AND STEERING WHEEL
Using stored positions for seats,
mirrors and head-up display*
If the positions for the power* seat, door mir-
rors and head-up display* have been stored,
they can be activated using the memory but-
tons.
Using a stored position
A stored position can be used with the front
door open or closed:
Front door open
Briefly press one of the memory buttons 1
–
( ) or 2 ( ). The power seats, door mir-
rors and head-up display will move and
stop at the positions stored in that button.
* Option/accessory.
}}
185