T Roubleshooting - Rio PMP300 64MB User Manual

Downloading Files Using Drag-n-Drop
You can also use Rio's Drag-n-Drop feature to load files from
your desktop to the Rio memory window.
To use the Drag-n-Drop feature:
1. Follow steps 1-2 in the previous section.
2. Open a folder on your computer that contains MP3 files.
3. Select the files you want using your mouse, and drag the files
over to the Rio memory window. The MP3 files are now
loaded into the Rio memory.
4. When the file download is complete, the LED display returns
to either Off or Stop mode. You can disconnect the data
transfer cable at this time, and take Rio with you.
Notes—(1) Files will not load into Rio if you exceed the available
memory (see Chapter 4,
into the currently displayed (Internal or External) Memory
window only. (3) Drag-n-Drop functions will not work with the
MusicMatch software.
If you need additional help using the Rio PMP Manager, click ?
located in the upper-right side of the Rio Manager. You can also
access general online Help for Rio. Click Start > Programs > Rio
PMP300 > Online Help.
Playing MP3 Files with Rio
To begin music playback, insert headphones (see Figure B, page 9)
into the headphone jack and turn Rio on by pressing the Play
button. The first track begins to play. Use the playback buttons to
move to other tracks, or perform other commands. Refer to the
table on page 10 for a quick reference of the playback commands.
After Rio plays the last track, it shuts off automatically—unless
you pressed the Repeat button.
Playing MP3 Files Using the Rio Manager
You can also drag MP3 files into, and play them directly from the
Rio Manager using your PC sound system. After you open the Rio
Troubleshooting
). (2) Files always load
Using the Rio Player 15