2. Insert the 1.5v AA battery into the
battery compartment.
3. Close the battery compartment lid.
Attach Data Transfer
Cable
1. Align one end of the 15-
pin data transfer cable
(item C, page 4) with its
connector slot on the
parallel port adapter .
2. Insert the data transfer
cable into the connector
on the parallel port
adapter until it locks into
place as shown.
Note—DO NOT FORCE the
data transfer cable into the
parallel port adapter or the Rio player. It is a one-way fit only.
Flip the connector and reinsert if it does not fit easily.
3. Connect the opposite end of the
data transfer cable to the data
cable connector slot located on
the side of the Rio Player.
You are now ready to use the Rio
player.
8
Data transfer connector
15-pin data
transfer cable
Slide until
connector
locks