Advertisement
www.seagate.com
2.6.3
Shock and Vibration
Shock and vibration measurements specified in this document are made directly on the drive itself and applied in the X, Y, and Z axis at the drive
mounting point locations.
2.6.3.1
a. Operating
The drive will operate without error while subjected to intermittent shock pulses not exceeding 50 Gs at a maximum duration of
2ms.
b. Non-operating
The drive will operate without non-recoverable errors after being subjected to shock pulses not exceeding 200g at a maximum
duration of 2ms.
2.6.3.2
a. Linear Random Operating Vibration
The drive will operate without non-recoverable errors while being subjected to the random power spectral density noise
specified below.
b. Random Rotary Operating Vibration
The drive will exhibit greater than 90% throughput for sequential and random write operations while subjected to the shaped
random power spectral density noise specified below.
c. Linear Random Non-Operating Vibration
The drive will not incur physical damage or have non-recoverable errors after being subjected to the power spectral density
noise specified below.
Seagate SkyHawk AI Serial ATA Product Manual, Rev. A
Shock
Vibration
Drive specifications
15
Advertisement
