Download Print this page

Seagate SKYHAWK AI ST18000VE000 Product Manual page 15

Advertisement

www.seagate.com
2.6
Environmental limits
Temperature and humidity values experienced by the drive must be such that condensation does not occur on any
drive part. Altitude and atmospheric pressure specifications are referenced to a standard day at 58.7°F (14.8°C).
NOTE
2.6.1
Temperature
a. Operating
32°F to 149°F (0°C to 65°C) temperature range with a maximum temperature gradient of 36°F (20°C) per hour as
reported by the drive.
The maximum allowable drive reported temperature is 149°F (65°C).
Caution
Air flow may be required to achieve consistent nominal drive temperature values (see
the required cooling is provided for the electronics and HDA, place the drive in its final mechanical configuration, and
perform random write/read operations. After the temperatures stabilize, monitor the current drive temperature
using the SMART temperature attribute 194 or Device Statistics log 04h page 5.
b. Non-operating
–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification
assumes that the drive is packaged in the shipping container designed by Seagate for use with drive.
2.6.2
Humidity
The values below assume that no condensation on the drive occurs. Maximum wet bulb temperature is 84.2°F (29°C).
2.6.2.1
Operating:
5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour.
Nonoperating:
5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour.
2.6.2.2
Operating:
–304.8 m to 3048 m (–1000 ft. to 10,000+ ft.)
Nonoperating:
–304.8 m to 12,192 m (–1000 ft. to 40,000+ ft.)
Seagate SkyHawk AI Serial ATA Product Manual, Rev. A
To maintain optimal performance drives should be run at nominal drive temperatures and
humidity.
See
Section 2.10, "Reliability"
Seagate does not recommend operating at sustained drive temperatures above 60°C.
Operating at higher temperatures may affect product performance.
Relative humidity
Effective Altitude (sea level)
for rated MTBF device operating condition requirements.
Drive specifications
Section
3.4). To confirm that
14

Advertisement

loading