Advertisement
Attaching the chimney
extension
The use of a chimney extension, allows
the hood to be installed at various
distances from the ceiling.
NOTE: The extension must be
intalled in relationship to the method
of venting; Extraction or
Recirculation.
Recirculation
The extension piece has vented
openings on one end.
These vents are required for recir-
culation mode and will be closest to the
ceiling when installed.
For air extraction, the vents are not
required and are covered by the
chimney.
Air extraction
^ Remove the protective foil from
chimney extension.
^ Bend the top hanging tabs 45°
inwards. This will make installing the
extension easier. Be careful of sharp
edges.
Recirculation
^ Pull the chimney extension slightly
outwards and snap over the upper
retaining plate B.
When installing for recirculation, ensure
that the vents are positioned so they
line up with the diverter.
Installation
Air extraction
37
Advertisement
