Advertisement
Retaining plates
The ventilation system will be mounted
to the wall through the use of retaining
plates. Plate A is installed first,
followed by plate B. Plate C should only
be used if the distance between plate A
and plate B is greater than 14
(365 mm).
Attaching the retaining plates
to the wall
^ Before fitting the retaining plate draw
a vertical line centrally above the
cooktop on the rear wall.
^ Mark measurement S from the
cooktop surface upwards (see
3
/
"
"Appliance dimensions"). This marks
8
the height of the lower rim of the
hood.
^ DA 217-2:
Drill a
line
marked S.
^ DA 219-2:
Drill two
(18 mm) above the height marked S
and 9
the center line.
1
/
" (3 mm) hole on the center
8
11
/
" (18 mm) above the height
16
1
/
" (3 mm) holes,
8
13
/
" (250 mm) right and left of
16
Installation
11
/
"
16
31
Advertisement
