Advertisement
Available languages
Available languages
Operating Instructions
Interior Adjustments
All 5 Series models feature side mounted rack supports with 19
adjustment positions.
All wine cellars ship with 7 racks designed to hold the maximum
number of typical white and red wine bottles. Remove and
reposition as desired to accommodate a variety of bottle sizes and
shapes
WINE RACK ADJUSTMENT
Wine Rack Removal
1.
Fully extend empty rack
2.
Firmly grasp both sides of rack and lift front end of rack slightly
(about ¼ ") to center the pin in the slot
3.
Pull rack towards you until all pins are clear of the slots. If only
repositioning the rack, do not remove completely - go to "Rack
Installation" Step 2.
4.
Slightly tilt one side. Gently pull rack towards you to remove
rack from unit.
Note: Take care when removing rack to avoid scratching interior of
unit.
5.
Note: The slides on the rack have a thin coating which is used to
block moisture and provide lubrication. Use care when handling.
Wine Rack Installation
1.
2.
3.
Center
the pin
4.
11
Once removed, retract the slides.
Insert empty rack into unit with one side tilted slightly
downward until back pin is between front and rear rail
supports.
Tilt rack back to horizontal and line up 2 back pins with back
slots.
Center
the pins
Back Pin
Line up 2 back pins with 2 back slots and 2 front pins with 2
front slots.
Continue inserting rack until all four pins are fully inserted.
Front of rack will set down slightly into the front slots and be
locked into position.
Front Pin
Advertisement
