Samsung DVD-HD850 Instruction Manual page 82

00701A-HD850_XST_eng_1
Connection to a TV (Progressive)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
4
Set the Video Output to HDMI/COMPONENT (P-SCAN) in the
Display Setup menu. (See pages 51 to 53)
You can use the VIDEO SEL. button to change the Video
Output mode. (See page 11)
To see the progressive video output,
- Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings
in the TV's menu system.
- Depending on your TV, the connection method may differ from the illustration above.
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
Progressive scanning method provides better and clearer picture quality.
2/3/05 7:38 PM Page 14
C
O N N E C T I O N S
RED
Audio Cable
RED BLUE GREEN
RED WHITE
ENG-14
RED BLUE GREEN
WHITE
Component cable
(not included)