Using The Memory Function - Omron M6W Instruction Manual

3. Using the Unit

3.4 Using the Memory Function

The monitor automatically stores the result up to 100 sets for each user (A and B). It
can also calculate an average reading based on the measurements from the last
three readings taken within 10 minutes. If there are only two readings in memory for
that period, the average will be based on two readings. If there is one reading in
memory for that period, the average will be based on one reading.
Notes:
• If the memory is full, the monitor will delete the oldest readings.
• When viewing the reading taken without setting the date and time, "-:--" is displayed instead of the date and time.
To View the Average Value
1.
Select your USER ID (A or B).
2.
Press the Memory button.
Note:
If there are no measurements results stored in the memory, the
screen to the right is displayed.
EN
11