LG ProBeam BF60PST Owner's Manual page 40

40
The HDBaseT Cable Install
• LAN cables are fairly resilient. Yet, any rough handling, such as tight tie wraps,
clamping or stapling can damage the cable, compromising performance or even
preventing signal transmission. Tie cables loosely with appropriate cable wraps.
•
Another important issue for cable integrity is the bend radius. Bend radius is
the inside curve of the cable during and after installation. It is best to keep the
minimum bend radius at least at four times the diameter of the cable.
• Cables should be kept at a distance of at least 30 cm (11.8 inches) from power
cables. In an environment prone to high EMI, it is best to use shielded cables.
•
If possible, avoid patch cords or cables altogether, as every connection
introduces losses in the transmission. If absolutely necessary, make sure to use
less than two per cable run and keep each less than five meters (16.4 feet) from
the end.
HDBaseT Recommended cable & transmitting device
• Visit the website (https://hdbaset.org/) and refer to information in details.