Section 4 - Configuration
General Settings
Dynamic IPsec
Toggle this switch to enable Dynamic IPsec.
Type
Select between Address and FQDN.
Remote host
Enter the IP address of the remote host. If Dynamic IPsec
is enabled, this field will be disabled.
Identifier value
Specify the local identifier value.
Pre-shared key
Specify a pre-shared key.
Local WAN
Specify the WAN from the drop-down list.
NAT Traversal
Specify either Disabled, Enabled or Force.
Type
Specify the IPsec mode of operation (either TUNNEL
or TRANSPORT).
D-Link DSL-G2452GR User Manual
IPsec/Adding
76