Section 4 - Configuration
On the VoIP / Call Feature Codes page, you can allow users to change some parameters of the router directly from the phone set connected to the
FXS port of the router.
Call Feature Codes Line 1/2
Dialing from
Toggle this to allow or disallow all codes for the phone connected to
Phone
the FXS port of the router.
Sending to Server
Toggle this to inform the SIP server when a user dials the codes on
the phone.
Transfer code
To specify a call feature code for transferring a call to another phone,
enter a code and click the APPLY button
Call Feature Codes
Setup name
The name of the call feature code.
VSC
The value of the code. If the code ends with * (the asterisk key), you
can enter a value for the function in use (a number for call forwarding
or a time for the alarm clock).
Dialing from
This indicates whether dialing from the phone is allowed or disallowed.
Phone
Sending to Server
This indicates whether the SIP server will be notified when a user dials
the code on the phone.
D-Link DSL-G2452GR User Manual
Call Feature Codes
99