7.3
Functions
Additional controller settings can be made by using the "Functions" sub-
menu.
The following submenus can be opened using the "Functions" menu item:
•
Circulation 7.3.
•
Back-up heating 7.3.3
•
Solid fuel boiler 7.3.4
•
Quick charge 7.3.5
•
Bypass 7.3.6
•
Heat quantity 7.3.7
•
Thermostat 7.3.8
•
Difference thermostat 7.3.9
•
Time function 7.3.10
•
Interval 7.3.11
•
Stagnation reduction 7.3.1
•
Holiday function/recooling 7.3.13
•
Frost protection 7.3.14
•
Anti-legionella function 7.3.15
•
Display storage tank top 7.3.16
•
Data logger 7.3.17
•
Alarm output 7.3.18
An overview of the factory settings and the ranges of possible settings
can be found in the table in chapter 15.3 "Parameter values for func-
tions".
7.3.1
Accessing a function
Before making settings within a function, you must perform the follow-
ing steps:
Selecting a function
SET: press button for approx. sec.
: select the menu item "Functions".
SET: open the submenu "Functions".
: selecting a function.
Activating/deactivating a function
SET: press button.
The display for activating (on) or deactivating (off) the function
is shown.
SET: press button for approx. sec.
The function is activated or deactivated.
NOTE
An information window is displayed if the function cannot be activated
(see chapter 1 "Information windows").
Selecting an output
: press button.
The display for setting the output appears.
SET: press button.
Output (?) flashes.
6
EN
Funktionen
[...............]
Funktionen
[...............]
Funktionen
Funktionen
Funktionen
Funktionen
Display: 3
Display: 3
[Function]
[Function]
[.......................]
[.......................]
[Time function]
[Time function]
[off]
[off]
[on]
[on]
Display example
Display example
730.137 | 08.37
on-off
on-off
/
/
[...]
[...]
[...]
[...]