Atis Id Number; Programming The Atis Id Number - Raymarine Ray101E Owner's Handbook Manual

28

4.17 ATIS ID Number

The Automatic Transmission Identification System (ATIS) is used in some
European countries to identify vessels in their inland waterways. After the
PTT key is released following a transmission, the vessel's ATIS ID number is
also transmitted.
You must enter your ATIS ID number into the Ray101E before the ATIS
system will be operational. Your ATIS number is derived from your vessels
call sign. Your authorized Raymarine dealer can assist you in decoding the
number.
Regulations in some regions may not allow end users to program their own
ATIS number. If this unit was purchased to be used in such a region, this
function will be disabled and the programming must be done by your
authorized Raymarine dealer/distributor.
Note: The ATIS ID is a ten digit number that always begins with a "9". You
will only enter the last nine digits; the first 9 is automatically entered for you.

Programming the ATIS ID Number

1. With the radio powered OFF, simultaneously press and hold the
key and the
2. While still depressing the two keys, turn ON the radio.
The ATIS ID programming screen is displayed.
key.
*
Ray101E Handheld VHF Radio