Pride BAJA MOBILITY WRANGLER Owner's Manual page 16

I I I . B AT T E R I E S A N D C H A R G I N G
Follow the 6 easy steps in fi gure 11 to charge your batteries safely:
1
4
Figure 11. Battery Charging Procedures Diagram
WARNING! The LED lights on the charger indicate different charger conditions at various times.
If the LED does not indicate that charging is complete within 24 hours, unplug the charger from
the outlet and contact your dealer. Refer to the operating instructions supplied with the charger
for a complete explanation of these indicators.
NOTE: There is a charger inhibit function on your vehicle. The vehicle will not run and the battery condition
meter will not operate while the batteries are charging.
FREQUENTLY ASKED QUESTIONS
How does the charger work?
When your vehicle's battery voltage is low, the charger works harder, sending more electrical current to the batteries
to bring up their charge. As the batteries approach a full charge, the charger sends less and less electrical current.
When the batteries are fully charged, the current sent from the charger is at nearly zero amperage. Therefore, when
the charger is plugged in, it maintains the charge on your vehicle's batteries, but does not overcharge them. Refer
to the manual supplied with the battery charger for charging instructions.
Can I use a diff erent charger?
Chargers are selected precisely for particular applications and are especially matched to the type, size and
chemical formulation of specifi c batteries. For the safest and most effi cient charging of your vehicle's batteries,
we recommend only use of the charger supplied as original equipment with your product. Any charging method
resulting in batteries being charged individually is especially prohibited.
What if my vehicle's batteries won't charge?
 Ensure the red (+) and black (-) battery cables are connected properly to the battery terminals.
 Ensure both battery harnesses that extend from the batteries are plugged into their mating harness leading to
the charger.
 Ensure both ends of the charger power lead are inserted fully.
 Ensure the circuit breaker is not tripped.
16
2
5
8-14H
3
6
Baja™ Mobility BA400