Table of Contents
Advertisement
CONNECTING TO RECEIVER WITH A DOLBY DIGITAL DECODER
If using this TV/VCR/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the
TV/VCR/DVD outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hook-
ing the TV/VCR/DVD up to a Dolby Digital decoder, you can enjoy a more convincing, realistic surround
sound as enjoyed in movie theaters.
Use audio coaxial digital cables available at retail stores for the audio connection.
Center
speaker
Front speaker
(left)
Receiver with Dolby
Digital decoder
Surround
speaker
(left)
NOTES:
•
Be sure to turn off the power to all components in the system before connecting them together.
•
Refer to the Owner's Manuals for the components to be connected to the TV/VCR/DVD.
•
If connected to a receiver with a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in
the setup mode. (See page 45 to set DOLBY DIGITAL to ON.)
•
Unless connected to a receiver with a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio out-
put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion and may also
damage the speakers.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
All manuals and user guides at all-guides.com
(for DVD)
Front speaker
(right)
To COAXIAL DIGITAL
AUDIO INPUT jack
Subwoofer
Surround
speaker
(right)
- 14 -
ANT.
AUDIO OUT
COAXIAL
DIGITAL AUDIO OUT
COAXIAL
[Fig. 7]
EN
1C29
Advertisement
Table of Contents
