Defy EYE LEVEL 600 MSE Owner's Manual page 19

CONDITION
Requires routine cleaning.
Finger prints.
Stubborn stains and
Discolouration.
Grease and fat splatter.
Scratches on the brushed
finish.
IT MUST BE APPRECIATED THAT SOME OF THE SUGGESTED PROCEDURES WILL
ALTER THE SURFACE APPEARANCE OF THE TREATED AREA. THEY SHOULD
THEREFORE BE APPLIED WITH DUE CONSIDERATION AND CARE.
PAGE 19 OF 24
ACTION
Mild detergent solution
applied with soft sponge or
cloth. Rinse and wipe dry.
Pre-treat finger marks with
alcohol or an organic
solvent. Follow immediately
with routine cleaning.
Wipe with a little baby oil
and a soft lint free cloth.
Buff to shine.
Use a little Ceran cleaning
paste. (available from Defy
Service Centres).
Rinse and dry.
Wipe off excess with a soft
cloth or paper towel. Use a
water borne degreasing
agent ( dishwashing
liquid ).Follow up by routine
cleaning.
For slight scratches, use a
nylon pad loaded with an
iron-free abrasive polishing
compound. Follow the
direction of the original
texture. Follow up with
routine cleaning.
For deep scratches use a
coarser abrasive initially and
follow up as for light
scratches.
NOTES AND COMMENTS
If possible use warm to hand
-hot water. A 5% addition of
ammonia is beneficial.
Minimize re-occurrence by
applying a wax or silicone
based household polish to
the clean dry surface.
Apply whenever necessary.
Repeat several times rather
than resorting to a single
aggressive cleaning method.
Deep scratches will be
difficult to remove
completely. Do not use steel
wool or metal scourers
unless they are made from
stainless steel.