Mechanism Adjustments; Assembling Slide Deck Assembly And Main Deck Assembly - JVC GR-DVL365EG Service Manual

2.6 MECHANISM ADJUSTMENTS

2.6.1 Assembling slide deck assembly and main deck assembly

œ
2
Œ
3
A
Assembling procedure
1. Loosen the screw A.
2. Set the mechanism in the PLAY mode.
(Refer to "2.3.2 Explanation of mechanism mode".)
3. Press the end face B of the slide deck assembly (reel
disk side) and the end face C of the main deck assem-
bly (drum assembly side) with uniform force so that the
two assemblies are tightly pressed to each other. Further-
more, press the part D and tighten the screw A.
Note : Tightening torque for screw A : 0.069 N·m (0.7 kgf·cm)
C
3
D
3
B
C
3
3
B
Fig. 2-6-1
1
2-16