Installing Thunderboltm3 Card - MSI MEG X299 CREATION Quick Start Manual

Installing ThunderboltM3 Card

1. Insert the ThunderboltM3 into the PCIe 3.0 x4 Thunderbolt supportive slot.
2. Connect one end of the Thunderbolt cable to the J1 connector on the card.
3. Connect the other end of the Thunderbolt cable to the JTBT1 connector on the
motherboard.
4. Use the screw to secure the ThunderboltM3.
5. Connect one end of the DisplayPort cable to DP IN port on the ThunderboltM3.
6. Connect the other end of the DisplayPort cable to DP port on the graphics card.
7. Enabling Thunderbolt Technology in the BIOS.
4
USB 3.1 Type-C/
Thunderbolt™ 3
ports
DP IN ports
Daisy-Chain Thunderbolt drives and DisplayPort monitor
2
Daisy-Chain up to six Thunderbolt devices
J1 connector
1
3
Overview of Components
Thunderbolt cable
JTBT1 connector
49