Vacuum Cleaner Care - Kenmore Elite BU1017 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

The brushroll has built-in protection
against motor damage should the
brushroll jam. If the brushroll slows down
or stops, the brushroll overload protector
shuts off the brushroll motors. The vacuum
cleaner suction motor will continue to run.
Always follow all safety precautions when performing maintenance to the vacuum cleaner.
WARNING
Electrical Shock And Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the vacuum cleaner. Failure to do
so could result in electrical shock or personal injury from vacuum cleaner suddenly
starting.
CLEANING EXTERIOR AND ATTACHMENTS
1. Turn off and unplug vacuum cleaner. DO
NOT drip water on vacuum cleaner.
2. To clean exterior, or to reduce static elec-
tricity and dust build-up, wipe outer surface
with a clean, soft cloth that has been
dipped in a solution of mild liquid detergent
and water, then wrung dry. Wipe dry after
cleaning.
Wash attachments in warm soapy water,
rinse and air dry. Do not clean in
dishwasher.
BRUSHROLL OVERLOAD PROTECTOR

VACUUM CLEANER CARE

To correct problem: Turn off and unplug
vacuum cleaner, remove obstruction, then
press OVERLOAD PROTECTOR RESET.
NOTE: Once the brushroll motor shuts
down, clear jam from brushroll and
wait a minimum of 20 seconds before
resetting overload protector.
If the problem persists, call 1-877-531-7321
(US) / 1-844-608-3081 (CA) for assistance.
CAUTION
Do not use attachments if they are wet.
Attachments used in dirty areas, such
as under a refrigerator, should not be
used on other surfaces until they are
washed. They could leave marks.
- - 14 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents