Table of Contents
Advertisement
7. Complete the following:
If you want to...
install a yellow map,
install a red map,
install the selected maps to your Navman,
8. Select the destination media (Navman internal memory) for the selected maps, then
click Install Maps.
The selected maps will be installed and change colour to green.
Do not disconnect the USB cable until the installed map or maps have changed colour
to green.
9. To use your Navman, disconnect the USB cable. You may need to manually reset your
Navman.
How do I remove maps from my Navman?
1. Open NavDesk, and then click My Maps.
2. From the My Navman panel, select the checkbox next to the map you want to remove.
3. Click Remove Maps to remove the selected maps.
4. Confirm that you want to remove the selected map when prompted. The map is
removed from your Navman. You can reinstall these maps at any time via NavDesk.
Custom POIs
NavDesk Custom POIs
Then...
go back to step 6.
the map needs to be activated via the Internet
before it can be installed; go back to step 4.
continue to step 8.
39
Advertisement
Table of Contents
