Table of Contents
Advertisement
If you want to...
change the screen brightness in day/night
mode,
Safety
If you want to...
enable/disable the warning message after
long-distance driving,
enable/disable speed limit alerts, which
warn you of the speed limit on any given
road,
enable/disable speed limit alerts, which
warn you of the speed limit on any given
road,
set the speed limit alerts manually,
enable/disable a visual warning if the
screen is accessed in a moving vehicle,
set how you want to receive the camera
and safety alerts,
Then...
tap
/
on the Day brightness/Night brightness
bar.
The brightness bar indicates the brightness level.
Note: You can simply tap on the brightness bar and the
screen brightness will be set immediately at the position you
tapped.
Note: Your Navman can heat up when the brightness
scale is set high, therefore, use lower brightness whenever
acceptable.
Then...
tap Driver fatigue alert to turn it on or off.
tap Speed limit display to turn it on or off.
tap Speed limit alerts and select:
• Off: disable the speed limit alert.
• Auto: set the system to alert automatically while
your speed is above the limit.
• Speed limit + 5 km/h (+ 3 mph): set the
system to alert while your speed is 5 km/h (3 mph)
or more above the limit.
• Speed limit + 10 km/h (+ 7 mph): set the
system to alert while your speed is 10 km/h (7 mph)
or more above the limit.
tap Set manual speed alert to select the speed limit
or turn it off.
tap Warn me not to operate my Navman while
driving to turn it on or off.
tap Speed Camera / Average Speed Camera
/ Red Light Camera / Accident Black Spot /
School Zone / Railway Crossing to select:
• No alerts
• Visual alert
• Visual & audible alerts
29
Advertisement
Table of Contents
