Moisture Condensation; Condensación De La Humedad - Samsung Hi8 SCL870 Owner's Instruction Book

Video camcorder
Hide thumbs Also See for Hi8 SCL870:
Table of Contents

Advertisement

ENGLISH
Troubleshooting

Moisture Condensation

If the camcorder is brought directly from a cold place to a warm
place, moisture may condense inside the camcorder,
on the surface of the tape, or on the lens. In this condition, the
tape may stick to the head drum and be damaged or the unit
may not operate correctly.
To prevent possible damage under these circumstances, the
camcorder has a built-in moisture sensor.
If there is moisture inside the camcorder,
"DEW(
)" is displayed.
If this happens, none of the functions
except cassette ejection will work.
Open the cassette compartment and
remove the battery for at least two hours
in a warm dry room.
Please follow this procedure when the DEW
protection feature is unexpectedly activated
and you want to override it:
(Please make sure that the condensation
has disappeared completely.)
1. Take the battery pack out.
2. Take the lithium battery out.
3. Put the lithium battery back.
4. Put the battery pack back.
Resolución de problemas
Condensación de la humedad
Si se pasa la vídeocámara directamente de un lugar frío a otro
con una temperatura más elevado, puede condensarse la
humedad en el interior de la videocámara, en la superficie de
la cinta o en las lentes. En este caso, la cinta puede adherirse
al tambor del cabezal y dañarse, o hacer que el
funcionamiento no sea correcto. Para evitar posibles daños
bajo estas circunstancias, la videocámara tiene integrado un
sensor de humedad.
Si hay humedad en el interior de la
videocámara, se mostrará "DEW(
DEW
En este caso, no se activará ninguna de
las funciones con la excepción de la
expulsión.
Abra el compartimento del videocasete y
saque la batería y manténgala al menos
dos horas en una habitación templada y
seca.
Si se activa de forma inesperada la
protección DEW, y desea cancelarla,
haga lo siguiente: (Asegúrese de que ha
desaparecido completamente la
condensación.)
1. Extraiga la batería.
2. Saque la batería de litio.
3. Vuelva a colocar la batería de litio.
4. Vuelva a colocar la batería.
ESPAÑOL
)".
67

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hi8 scl860Hi8 scl810

Table of Contents