Advertisement
Available languages
Available languages
Grease Cup:
13
Failure to install grease cup clip and cup will cause hot
grease to drip from bottom of grill with risk of fire or
property damage.
LP tank is sold separately. Use only with an OPD (over-fill protection device) equipped LP
tank. Fill and leak check before attaching to grill and regulator. Place LP tank into hole in
bottom shelf with tank collar opening facing to back as shown. Raise tank holder to hold LP
tank securely in place. Secure the regulator hose to the slot hole of right side panel with
hose fixed pin.
Hang grease cup clip from bottom of firebox and place grease cup into grease cup clip.
Unscrew igniter cap from control panel. Insert one AAA battery (provided) into battery slot
with positive end (+) facing outward. Screw cap back onto panel.
Failure to install tank correctly may allow gas hose to be
damaged in operation.
146.23686310 •
27
Advertisement
