Operation - MULTIQUIP QP402B Operation Manual

DANGER
NEVER operate the pump in a confined
area or enclosed structure that does not
provide an ample free flow of air.
WARNING
NEVER pump flammable fluids, corrosive chemicals,
or fluids containing toxic substances. These fluids can
create potentially dangerous health and environmental
hazards. Contact local authorities for assistance.
CAUTION
DO NOT attempt to operate the
pump until the Safety Information,
General Information, and Inspection
sections of this manual have been
thoroughly read and understood.
CAUTION
ALWAYS wear approved eye and hearing
protection while operating the pump.
NOTICE
NEVER attempt to start the engine unless the pump
has first been primed with water. Severe damage will
occur to the pump's mechanical seal if the pump has
not been primed.
QP402B CENTRIFUGAL PUMP • OPERATION MANUAL — REV. #0 (05/15/23)— PAGE 17
STARTING THE ENGINE
1. Place the engine fuel valve lever (Figure 8) in the
ON position.
FUEL VALVE
Figure 8. Engine Fuel Valve Lever (ON)
2. Place the engine throttle lever (Figure 9) in the IDLE
position.
THROTTLE
LEVER
Figure 9. Throttle Lever (Idle)

OPERATION

LEVER