5. HANDLING PRECAUTIONS
• Please apply the latest firmware version to this product. The latest version is available at the TOA
DATA Library (https://www.toa-products.com/international/).
• As this product is IP-based, a slight time lag between actual and broadcast may happen.
• Broadcast audio may sometimes break up due to packet loss or network failure.
• Periodic inspection and manual rebooting are needed to extend the product life.
This product may reboot automatically to keep the stable operation.
•
6. INSTALLATION PRECAUTIONS
CAUTION
Observe the following instructions when attaching the safety wire. Failure to do so could result in
the speaker falling, potentially resulting in personal injury.
• Select a safety wire that is strong enough to withstand the total weight of the speaker being
mounted.
• Use a wire with a diameter larger than 1.5 mm or 0.06".
• Attach the safety wire so that it does not become slack.
Notes
• Since safety wire is not supplied with the IP horn
speaker, be sure to prepare it separately.
• When attaching the safety wire, be sure that it is
fastened securely to the safety wire attachment
ring.
Mount the speaker so that its downward inclination is within 80° of horizontal, and the cable inlet is
facing downward, as shown in the figure below.
8
Downward
Cable
inclination: 80°
Safety wire attachment ring
[Mounting bracket dimensional drawing]
141 (5.55")
25 (0.98")
50 (1.97")
Unit: mm
5 (0.2")
16
(0.63")
Unit: mm
3 – ø9
(0.12" – ø0.35")