Bridge With Ap Mode; Bridge With Ap Mode - D-Link 0790069323058 User Manual

Wireless n open source access point

Hide thumbs

100

101

Table of Contents

Section 3 - Configuration

Enable Wireless:

Select this to turn the Wi-Fi module on and off. Use the

drop-down box to select if you want to use a schedule.

Click Add New to add or change a schedule.

Wireless Mode:

Select Bridge with AP from the drop-down menu.

Wireless Network

The Wireless Network Name is a unique name that

Name:

identifies a network. All devices on a network must

share the same wireless network name in order to

communicate on the network. If you decide to change

the wireless network name from the default setting,

enter your new wireless network name in this field.

802.11 Mode:

Select the appropriate 802.11 mode based on the

wireless clients in your network. The drop-down menu

options are 802.11g Only, Mixed 802.11b/g, 802.11b

Only, 802.11n Only, or Mixed 802.11b/g/n.

Wireless Channel:

All devices on the network must share the same channel.

Enable Auto Scan:

The Auto Channel Scan setting can be selected to allow

the DAP-1360 to choose the channel with the least

amount of interference.

Select the appropriate channel width between 20MHz

Channel Width:

or Auto 20/40MHz from the drop-down menu.

Visibility Status:

Check the box if you do not want the SSID to be broadcast by the DAP-1360. This prevents the SSID from being seen by site survey

utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-1360 in order to connect to it.

Remote AP MAC:

Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly connect multiple networks.

Bridge Security:

Select None to disable encryption to across the network. Select WEP 64-bits or WEP 128-bits to limit communication to only those

devices that share the same WEP settings. Select WPA-PSK or WPA2-PSK to secure your network using a password and dynamic key

changes (No RADIUS server required).

Note: The Bridge with AP mode is not completely specified in the Wi-Fi or IEEE standards. This mode can work with other DAP-1360 units. Communication with other APs (even other

D-Link APs) is not guaranteed.

D-Link DAP-1360 User Manual