Repeater Mode; Repeater Mode - D-Link 0790069323058 User Manual

Section 3 - Configuration
Enable Wireless:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions. Y ou may also set up a specific time
range (schedule). Select a schedule from the drop-down
menu or click Add New to create a new schedule.
Wireless Mode:
Select Repeater from the drop-down menu.
Site Survey:
Click Site Survey to display a list of wireless networks
in your area. You may select the wireless access point
to connect to.
Wireless Network
Enter the SSID of the access point you want to repeat the
Name:
signal of. If you do not know for sure, click Site Survey
and select it from the list, if available.
802.11 Mode:
Select the appropriate 802.11 mode based on the
wireless clients in your network. The drop-down menu
options are 802.11g Only, Mixed 802.11b/g, 802.11b
Only, 802.11n Only, or Mixed 802.11b/g/n.
Enable Auto
The Auto Channel Scan setting can be selected to allow
Channel Scan:
the DAP-1360 to choose the channel with the least
amount of interference.
Wireless Channel:
The channel will automatically change to the channel of the AP you are connected to.
Channel Width:
Select the appropriate channel width between 20MHz or Auto 20/40MHz from the drop-down menu.
Visibility Status:
Check the box if you do not want the SSID to be broadcast by the DAP-1360. This prevents the SSID from being seen by site survey
utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-1360 in order to connect to it.
Wireless Security
Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See the Wireless Security section in this manual for a detailed
Mode:
explanation of the wireless security options.
D-Link DAP-1360 User Manual

Repeater Mode

37