Firewall Settings - D-Link DIR-895L User Manual

Section 4 - Configuration - Router Mode
The router's firewall protects your network from malicious attacks over the Internet. In the
Features menu on the bar on the top of the page, click Firewall Settings. Click Advanced
Settings... to expand the list and see all of the options.
Enable DMZ:
Enable or disable the Demilitarized Zone (DMZ). Enabling DMZ is not
recommended.
DMZ IP Address: If DMZ is enabled, enter the IP address of the client you wish to expose,
or use the drop-down menu to quickly select it.
Enable SPI IPv4: Enabling Stateful Packet Inspection (SPI) helps prevent cyber attacks
by validating that the traffic passing through the session conforms
to known patterns.
Enable Anti-Spoof Enable this feature to protect your network from certain kinds of
Checking: "spoofing" attacks.
IPv6 Simple Enable or disable IPv6 simple security.
Security:
IPv6 Ingress Enable or disable IPv6 ingress filtering.
Filtering:
D-Link DIR-895L User Manual

Firewall Settings

Home Settings
DIR-895L HW:A1 FW:1.12
Firewall Settings
Your router's high-performance firewall feature continuously monitors Internet traffic, protecting your network
and connected devices from malicious Internet attacks.
Features >> Firewall Settings >> Advanced IPv4 Rules
Enable DMZ: Enabled
DMZ IP Address:
Enable SPI IPv4: Disabled
Enable Anti-spoof Checking: Disabled
IPv6 Simple Security: Disabled
IPv6 Ingress Filtering: Disabled
Application Level Gateway (ALG) Configuration
PPTP: Enabled
Enabled
IPSec (VPN):
RTSP: Enabled
SIP: Enabled
COPYRIGHT © 2016 D-Link
Features Management
IPv6 Rules Save
⌵
<< Computer Name
Advanced Settings ...
82