D-Link DIR-895L User Manual page 51
Ac5300 ultra wi-fi router
Hide thumbs
Also See for DIR-895L:
- Quick installation manual (37 pages) ,
- Manual (8 pages) ,
- Quick install card (2 pages)
Table of Contents
Advertisement
Section 4 - Configuration - Router Mode
Dynamic IP
Primary DNS
Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. The recommended setting is Auto.
Static IP
PPTP IP Address:
Enter the IP address provided by your ISP.
PPTP Subnet
Enter the subnet mask provided by your ISP.
Mask:
PPTP Gateway IP
Enter the gateway IP address provided by your ISP.
Address:
Primary DNS
Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. The recommended setting is Auto.
Click Save when you are done.
D-Link DIR-895L User Manual
PPTP (continued)
⌵
Address Mode:
Dynamic IP
Primary DNS Server:
Secondary DNS Server:
⌵
MTU:
Auto
COPYRIGHT © 2016 D-Link
⌵
Address Mode:
Static IP
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway IP Address:
Primary DNS Server:
Secondary DNS Server:
⌵
MTU:
Auto
COPYRIGHT © 2016 D-Link
46
Advertisement
Table of Contents
