Care & Cleaning - Breville BBL820 Manual

Care & Cleaning
Jug and Lid
To avoid food drying on blades, jug and lid,
follow the below steps as soon as possible
after use:
• Rinse most of the ingredients off the jug
and lid.
• Add 4 cups (around 1L) of warm water and
1–2 drops of detergent and press the CLEAN
button.
• Rinse the jug and lid again and/or wash
separately in warm soapy water with a soft
cloth or bottle brush.
WARNING
Oils in citrus rind can damage the material
of the jug if left to sit on the jug for too
long. Always clean your blender jug
immediately after processing citrus rind.
Sanitizing
The recommended sanitizing solution is
1½ tsp (7.5mL) of household bleach in 2 quarts
(2L) of clean, cool water, mixed according to
the recommended instructions on the bleach
container. To sanitize, follow the below steps:
1. After performing the auto clean cycle
as per the instructions above, add
half of the recommended sanitizing
solution (1 quart/1L) to the jug. Secure
the lid and inner lid and press CLEAN
to run a sanitizing clean cycle.
2. Allow to stand for 1 minute, then empty
solution.
3. To sanitize the lid and tamper soak
them in 1 quart (1L) of the sanitizing
solution mixture for 2 minutes.
4. Place the empty jug and lid back on
blender base and run on manual speed
MIX for 10-20secs to remove any
excess moisture from the blade area.
16
5. Wipe the exterior of the lid, jug and
base with a soft cloth dampened
with the sanitizing solution.
6. Do not rinse after sanitizing. Allow
to air dry before storage. Rinse with
clean water prior to next use.
Motor base
To clean the motor base, wipe with a soft,
damp cloth then dry thoroughly. Wipe any
excess food particles from the power cord.
Cleaning agents
Do not use abrasive scouring pads or
cleaners on either the motor base or the
jug, as they may scratch the surface. Use
only warm soapy water with a soft cloth.
Dishwasher
The blender jug, tamper and lid can be
washed in the dishwasher on a standard
wash cycle. Jug can be placed on the
bottom shelf, however the tamper and lid
should be washed on the top shelf only.
Stubborn food stains and odors
Strong smelling foods such as garlic, fish and
some vegetables such as carrots may leave an
odor or stain on the blender jug and lid.
To remove, soak blender jug and lid for
5 minutes in warm soapy water. Then wash
with a mild detergent and warm water,
rinse well and dry thoroughly. Store jug
with the lid off.
Storage
Store your blender upright with the
blender jug assembled on the motor base,
or beside it. Do not place anything on top.
To allow air to circulate, keep the lid off.
Dry milling
Please note that milling hard ingredients
like spices, nuts, sugar, coffee, grains,
etc. will cause scratching and clouding
to the inside surfaces of the jug.
This is a cosmetic result from milling
these kinds of ingredients, and does not
affect the performance of the jug.