Advertisement
Care & Cleaning
Jug and Lid
To avoid food drying on blades, jug and lid,
follow the below steps as soon as possible
after use:
• Rinse most of the ingredients off the
jug and lid.
• Add 1L of warm water and 1–2 drops of
detergent and press the CLEAN button.
• Rinse the jug and lid again and/or wash
separately in warm soapy water with a soft
cloth or bottle brush.
WARNING
Oils in citrus rind can damage the material
of your jug if being exposed to it for a longer
period. Always clean your blender jug and
personal blender cup immediately after
processing citrus rind.
Motor base
To clean the motor base, wipe with a soft,
damp cloth then dry thoroughly. Wipe any
excess food particles from the power cord.
Cleaning agents
Do not use abrasive scouring pads or
cleaners on either the motor base or the jug,
as they may scratch the surface. Use only
warm soapy water with a soft cloth.
Dishwasher
The blender jug, tamper and lid can be
washed in the dishwasher on a standard
wash cycle. Jug can be placed on the bottom
shelf, however the tamper should be on the
top shelf only.
14
Stubborn food stains and odours
Strong smelling foods such as garlic and
fish, and some vegetables such as carrots,
may leave an odour or stain.
2 Litre jug
To remove, clean the jug and lid using
the CLEAN instructions. Add 2 tablespoons
bicarbonate of soda and ½ cup (125mL)
vinegar into jug and let the mixture froth
for 1 minute. Scrub the jug and lid with the
mixture using a soft dishwashing brush.
Add 2 cups warm water and allow to stand
for 5 minutes. Attach jug to blender base.
Secure lid and then press the CLEAN
button. Thoroughly rinse the jug, and allow
to air dry. Store jug and lid with the lid off to
allow air to circulate.
Dry milling
Milling hard ingredients like spices,
nuts, sugar, coffee, grains, etc will cause
scratching and clouding to the inside
surfaces of the jug.
Some spices and herbs release aromatic
oils that may discolour the jug or leave
an aroma.
These are cosmetic results from milling
these kinds of ingredients, and does not
affect the performance of the jug.
Storage
Store your blender upright with the blender
jug assembled on the motor base, or beside
it. Do not place anything on top. To allow
air to circulate, keep the lid off.
Advertisement
