Vcr And Cable Or Antenna - Sony FD Trinitron WEGA KD-34XBR970 Operating Instructions Manual

VCR and Cable or
Antenna
Using
S VIDEO jacks?
See page 7.
TV
Notes on Using This Connection
To Do This ...
Watch the VCR
Watch cable channels
Set up the TV remote control
to operate the VCR
Activate the TV remote
control to operate the VCR
Control VCR functions with
the TV remote control
Label video inputs to easily
identify equipment connected
to the TV
8
For best results, use this connection if:
❑
Your cable company does not require you to use a cable box.
To connect the VCR and Cable or Antenna
1
Connect the CATV cable or Antenna to the VCR's input jack.
2
Use a coaxial cable to connect the VCR's output jack to the TV's
VHF/UHF jack.
3
Use an A/V cable to connect the VCR's A/V output jacks to the
TV's A/V input jacks.
4
Run Auto Program, as described in "Setting Up the Channel List"
on page 20.
DIGITAL DIGITAL
AUDIO AUDIO
OUT OUT
PCM/ PCM/
DOLBY DIGIT DOLBY DIGITAL AL
VCR
A/V cable
Do This ...
Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Press TV/VIDEO repeatedly to select the cable input.
If you have a non-Sony VCR, you must program the remote control. See
"Programming the Remote Control" on pages 24-25.
VCR/DVD FUNCTION.
Press
See "Operating a VCR" on page 26.
See the instructions for setting up Video Labels on page 45.
Coaxial cable
CATV cable/antenna
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.