Table of Contents
Advertisement
9001-0024
1.
Remove the two heat sink screws. The heat sink screws are located on the top of the cabinet. See Figure 6-1.
2.
Remove the four chassis mounting screws. See Figure 6-1 for chassis screw locations.
3.
Carefully remove the control panel.
6.4.2
Replacing the Control Panel
Follow these steps to replace the control panel:
Note:
Use a grounding strap when working with static sensitive components.
1.
Align the control panel with the chassis mounting stand-offs. See Figure 6-1.
2.
Insert the four chassis mounting screws (see Figure 6-1). Do not over tighten the chassis mounting screws.
3.
Insert the two heat sink screws (see Figure 6-1). Do not over tighten the heat sink screws.
Note:
The heat sink screws must be installed for proper heat dispersion of the power module's power supply.
Figure 6-1 Mounting Screw Locations
6-24
Advertisement
Table of Contents
